header_inner.jpg

Frequently Asked Questions

YES, SIDEBAR is completely plumbed and wired from the factory. Basic "handyman" skills and household tools should accomplish the job. You will need to drill a 1" hole in the mounting surface for the spout opening.
NO, All SIDEBAR Systems are engineered to be drip-free. Once a beverage is dispensed, a slight reverse suction pulls the liquid back into the spout, preventing any drips or leakage.
NO, The dispensing spouts on all SIDEBAR Systems use 5 individual lines and pumps; these lines run from the supply bottles all the way to the end of the dispensing spout. There is no way any two flavors can mix or be cross contaminated.
YES, You can install the SIDEBAR on any granite, stone, Corian, tile or laminated surface. If you do not have the experience or tools necessary for drilling on hard surfaces like granite or stone, you may seek the help of a professional.
NO, All SIDEBAR Systems are designed to serve non-carbonated and pulp-free beverages only. Carbonated beverages are dispensed through a very sophisticated system that requires pre-mix syrups, carbonated water, Co2 and a chiller system. SIDEBAR will dispense any variety of juice, liquor, non-carbonated water, margarita mixes, and red or white wines.


 

Super SIDEBAR 6500 Series